Boat Registration Graphics

Boat Registration Graphics

This product is designed to satisfy Environment Canterbury regulations. Most boats and jetskis operating in Canterbury are required to have an identifying number on each side of the hull.

Our registration product is made up of individual cut vinyl letters (it is not one big sticker). This means that the paintwork of your boat will show between the letters.

PLEASE NOTE: our registration letter sets are supplied with all capital letters – we do not supply these graphics with lower case letters. If you require lower case letters, please let us know before ordering.

Easy to apply – we supply the graphics with application tape in place – all you need to do is remove the liner from the back of the letters. The application tape will hold all the letters in place relative to each other. Then line up the graphics and press them on to the cleaned surface, preferably using a squeegee (a credit card should do). Once the letters are stuck on the boat, gently peel off the application tape and you are done!

Available in a choice of colours, fonts and letter heights (90mm minimum height).

Price is per identifying number set  (eg “MY826” in the photo opposite).

You will need to order 2 number sets if you want to be able to place a number set on each side of the hull.